Add-On DIY Light Bundle for LEGO® Shuttle Carrier Aircraft #10360

Ready to take your LEGO® Shuttle Carrier Aircraft build to the next level? This tutorial will guide you through lighting up the NASA Space Shuttle Enterprise—the iconic orbiter that sits atop the Boeing 747™ in this incredible set.

If you haven’t already completed the main lighting installation for the Shuttle Carrier Aircraft (the 747), we recommend starting there first. Click HERE to head on over. That tutorial covers the core setup, which this add-on builds on for a complete display. 

Once you're all set, follow along as we show you how to bring the NASA Space Shuttle Enterprise to life with our add-on light kit. It’s a fun and creative way to make your build even more eye-catching—because it’s your LEGO® set, and you decide how it shines.

Add On - LEGO® Shuttle Carrier Aircraft #10360 DIY Light Bundle

What's included:
1 x Astro Light Large Flicker Effect - Orange 30cm (2 Pack)
1 x Dock 6
2 x Solar Light - Orange 30cm (2 Pack)
1 x Tether 1x1 (4 Pack)

Total Price

$59.99 $83.95

View product

Bring Brilliance & Light to Your LEGO® Enterprise Shuttle

Now that your LEGO® Shuttle Carrier Aircraft is glowing with light, it’s time to give the Enterprise Shuttle its moment to shine! With illuminated engines and cockpit, this lighting add-on bundle from Light My Bricks™ will take your Enterprise Shuttle to the next level!  

With the Light My Bricks™ LEGO® lighting bundle for the Enterprise Shuttle, your iconic shuttle will truly come to life. Our lighting bundle includes everything you need to add glowing engine thrusters, a lit cockpit, and subtle, discreet lighting. Our DIY LEGO lighting tutorial walks you through every step of the add-on lighting process, which has been specifically designed by our team to perfectly complement the Shuttle Carrier Aircraft base build. Let your imagination take flight and transform your LEGO® Boeing 747 Shuttle Carrier and Enterprise Shuttle into a stunning centrepiece for your collection. 

Step-by-step our tutorial will show you how to:

• Install a LEGO® cockpit lighting mod using warm astro white lighting for a launch-ready look
• Simulate authentic engine glow using a trio of Solar Warm White and Flickering Orange LEDs
• Run cables cleanly using our LEGO® lighting kit installation tips for a sleek, display-ready finish
• Use our LEGO® lighting accessories to highlight intricate details, keeping the cabling and installation clean and neat
  
  

Whether you're a long-time LEGO® fan or new to the world of lighting kits, this Enterprise Shuttle add-on is the perfect bundle to light up your build.

Ignite & Showcase Your Build With DIY LEGO® Space Shuttle Lighting

The ideal way to complement your LEGO® Icons Shuttle Carrier Aircraft display is lighting up the Enterprise Shuttle. With the Light My Bricks™ LEGO® Space Shuttle lighting bundle, you just plug, clip, and play, no expertise required. Our LEGO® lighting bundle is designed specifically for the Shuttle portion of the build, bringing it to life with warm cockpit illumination and fiery, flickering engine lights.

Here’s why LEGO builders choose Light My Bricks™ as their go-to Shuttle lighting:

• Specifically designed & tailored for the Enterprise – Every component fits neatly into your LEGO® Enterprise Shuttle for a professional finished look.
• Simple to install – Designed for all skill levels, you simply follow our step-by-step LEGO® lighting kit installation guide.
• No glue, no stress – Our super-thin cabling and modular components mean no damage to your bricks—just a clean and tidy installation.
• Realistic display lighting – Whether you’re adding warm LEDs to flickering engine lights, our LEGO® display lighting guide lifts off to the next level!
• Expandable lighting options – Want more choice? Simply choose from our huge range of DIY components for a fully custom DIY LEGO® lighting tutorial experience.
  
  

Our amazing custom lighting add-on bundle will set your LEGO® Icons Shuttle Carrier Aircraft on a path to lighting brilliance! 

Here’s What You’ll Need:

• 2x Solar Light - Orange 30cm (2 Pack)

• 1x Astro Light Large Flicker Effect - Orange 30cm (2 Pack)

• 1x Dock 6 Pack

• 1x 1x1 Tether (4 Pack)

And you’ll need leftover parts from the Aircraft Shuttle Carrier Blog Kit. Make sure you still have access to:

• Warm White Spotlight Pack 
• Transparent Brick Pack

Step-by-Step Guide: How to Light Your LEGO®Shuttle Carrier Aircraft

Step 1: Removing Parts

Remove the shuttle from the back of the aircraft.

Remove the engine shroud from the shuttle.

Open up the cargo bay, preferably without destroying the doors.

Remove all five of the engines and the connector for the engines.

Step 2: Lighting the Cockpit

You will need the following parts:

• 1x Astro Large Warm White 30cm Light
• 1x 6 Dock

Remove pieces from the cockpit.

Place the remaining Astro Large Warm White 30cm Light where the black 2x2 slope and 1x2 plate were. Reattach all the pieces to pin them in place.

Connect the light into the 6 Dock.

Step 3: Lighting the Engines

You will need the following parts:

• 2x Astro Large Flickering Effect Orange 30cm Lights 
• 3x Solar Light Warm White 30cm
• 3x Solar Cap - Orange
• 2x Astro Cap
• 3x 1x1 Tether
• 2x 1x1 Round Plate with Open Stud - Transparent Orange

Remove the tail fin and the engine assemblies from the back of the shuttle.

Take one of the large main engines, and remove the 2x2 round plate.

Place a 1x1 Tether in the middle of the cone.

Thread the cable of the Solar Light through the 1x1 Tether and through the cone. Clip the Solar Light down onto the tether.

Cap the Solar Light with the Orange Solar Cap.

Replace the 2x2 round plate, and repeat these steps for the remaining engines until all three are done.

Remove panels from the connector.

Place each engine onto the bar handles.

For the centre engine, you can remove the 1x2 White Slope on the connector, and run the cable under that when replacing that panel.

For the side engines, run the cable under the panel when replacing.

Remove the two large arch pieces from the rear of the shuttle.

Connect the main engine assembly to the exposed technic pin, and run all the cables through to the cargo hold.

For the smaller engines, remove the black 1x2 Brick with Technic Hole and the white 2x3 Plate.

Place one of the 1x1 Cone pieces into the technic hole.

Thread one of the 30cm Astro Large Flickering Orange Lights through a Transparent Orange 1x1 Round Plate with Open Stud. Place an Astro Cap over the light.

Thread the cable through the cone, and clip into place.

Replace the assembly, and repeat for the other side.

Once both sides are done, replace the engine shroud on the shuttle. You may need to readjust the three main engine cables for it to sit flush.

Plug all of the cables into the 6 Dock.

Step 4: Connecting the Shuttle

You will need the following parts: 

• 1x 50cm Belt

Remove pieces from the belly of the shuttle.

Replace the 4x12 plate and the 1x2 plate with rail.

Plug the 50cm Belt into the 6 Dock, and run the belt through the hole in the cargo bay.

Reattach any forgotten pieces, like the arches, and close the cargo bay doors.

Pull the cable tightly, without disconnecting it from the dock, and reattach the plate.

Replace the tail fin of the shuttle.

On the plane, figure out which side of the plane to remove pieces from. It should be the side where there is an empty port available on the 3 Dock under the wing. If your side does not match the side shown in the pictures here, mirror all of the instructions.

Remove pieces from the side as shown.

Connect the shuttle onto the plane.

Plug the 50cm Belt into the 3 Dock under the wing.

Pull the cable taut, and clip it in place with the 1x6 plate that was just removed.

Pull the cable into the plane, and replace the tile and slope.

Hide as much of the 50cm belt as possible in the aeroplane, and replace the side.

Replace the remaining pieces and power on.

Become A Lighting Pro – Top Tips from Light My Bricks™

Are you ready to make your LEGO® Enterprise Shuttle glow like it's about to enter orbit? Adding lighting to this classic space shuttle gives your exhibit a vibrant, professional finish. With Light My Bricks™ it is easy to achieve the look and ocean install you want. We have all of the LEGO® lighting components you'll need to light up the cockpit, engines, or subtle structural elements.

To light up your LEGO® Icons Enterprise Shuttle with a polished, display-ready finish, simply follow our go-to tips: 

• Use 1x1 tethers and Eclipse clips to route cables smoothly and seamlessly without impacting the look and feel of your build
• Place lighting belts through stud gaps and under slope bricks to discreetly hide wires while maintaining easy access (just in case you want to level up again!)

From cockpit glows to flashing thrusters, every component of lighting can be easily integrated, with a stunningly impressive result every time.

Add On - LEGO® Shuttle Carrier Aircraft #10360 DIY Light Bundle

What's included:
1 x Astro Light Large Flicker Effect - Orange 30cm (2 Pack)
1 x Dock 6
2 x Solar Light - Orange 30cm (2 Pack)
1 x Tether 1x1 (4 Pack)

Total Price

$59.99 $83.95

View product

Add Your Own Flair with Custom LEGO® Enterprise Shuttle Lighting

Tell your own lighting story with our DIY Light Bundle for LEGO® ICONS™ Shuttle. Our add-on lighting is designed so you can enhance your entire build with high-quality, easy-to-install lighting options. No matter what your style or skill level, our lighting bundle is designed to be a seamless integration experience that’s fun and flexible.  

Follow along with our easy step-by-step shuttle lighting tutorial to install high-quality LEDs and componentry with ease. And if you need any advice or more help, dive into our troubleshooting guide, or contact our support team anytime. We’re always here to help you on your lighting journey to creating a masterpiece!